HP 330 - Manual (Page 82)

3–10
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 3–10 (seq: 82)
This is the black on page 3–10 (seq: 82)
Plotting a mirror image
You can plot a mirror image of a drawing, using the Setup Sheet, without changing
the drawing in your software,
The available options are:
Mirror off. With this setting, the plotter will print your plot as requested by your
software, without adding any mirroring. This is the default.
Mirror on. With this setting, the plotter will produce a mirror image of a
drawing, relative to the drawing’s orientation in your software:
Mirror off Mirror on
Localization Note. .Similar to Loquillo 750C UG p4–10.
Plotting a mirror image
Controlling your plot’s appearance