HP 330 - Manual (Page 78)

3–6
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 3–6 (seq: 78)
This is the black on page 3–6 (seq: 78)
Page size and clipped plots
When setting your page size, be aware that with some combinations of page size
and plot size, the plotter may print what it can, but may clip your plot:
If you specify in your software a page/plot size that is larger than the physical
size of the media loaded in the plotter.
A2 media in the plotter
A1 page size in software
Clipped area
If you specify in software a page size setting that is too small for the plot, the
plot will be clipped, even though the physical media size may be adequate.
If you specify a discrete page size in the Setup Sheet that is too small for the
plot, the plot may be clipped, even though the physical media size may be
adequate.
Physical roll media size
Clipped area
Page size specified in software
or in Setup Sheet
Full plot size
Localization Note. .Top part similar to Loquillo 750C UG p4–5..
Page size
Controlling your plot’s appearance