HONDA 2011 Pilot - Manual (Page 141)

The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).
You can insert or
remove the key only in this position.
To turn the key to the LOCK (0)
position, the shift lever must be in
Park, and you must push the key in
slightly.
If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
You can
operate the audio system and the
accessory power sockets in this
position.
This is the normal key
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from the
ACCESSORY (I) to the ON (II)
position.
Use this position
only to start the engine. The switch
returns to the ON (II) position when
you let go of the key.
You will hear a reminder beeper if
you leave the key in the ignition
switch in the LOCK (0) or the
ACCESSORY (I) position and open
the driver’s door. Remove the key to
turn off the beeper.
You will also see a ‘‘REMOVE KEY’’
message on the multi-information
display (see page
).
The shift lever must be in Park
before you can remove the key from
the ignition switch.
96
On vehicles with navigation system
Ignition Switch
LOCK (0)
ACCESSORY (I)
ON (II)
START (III)
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
137
10/01/26 18:46:14 31SZA620_142
2011 Pilot