HONDA 2011 Pilot - Manual (Page 468)

Negative distance traveled means
your vehicle has passed the
maintenance required point.
The system message will appear
again by pressing the INFO (
/ )
button after canceling it.
You will also see the system
message every time you turn the
ignition switch to the ON (II)
position until you have the indicated
maintenance performed by your
dealer.
Immediately have the service
performed, and make sure to reset
the display as described on page
.
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
the total distance traveled after the
remaining oil life became 0%, and the
maintenance item code(s). To cancel the system message, press
and release the INFO (
/ ) button
on the steering wheel. At this time,
the system message indicator will
be turned off. Then the display
will change to the engine oil life
display. You will see the negative
distance traveled blinking and a
‘‘SERVICE’’ message along with the
maintenance item code(s) on the
multi-information display.
465
Maintenance Information
not
464
U.S. U.S.
Canada Canada
10/01/26 19:43:59 31SZA620_469
2011 Pilot