HONDA 2011 Pilot - Manual (Page 54)

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Other LATCH-compatible seats
have a flexible-type connector as
shown above. 3.
4.
5.
157
Installing a Child Seat
50
RIGID TYPE FLEXIBLE TYPE
TETHER STRAP
10/01/26 18:31:33 31SZA620_055
2011 Pilot