HONDA 2011 Pilot - Manual (Page 56)

To install a LATCH-compatible child
seat in the passenger’s side seating
position of the third row:
Unlatch the detachable seat belt
anchor latch and retract the seat
belt all the way into the passenger’s
side panel. Place the latch plate
and anchor latch in their holding
slots (see page
).
Lower the head restraint first.
Route the tether strap over the
head restraint and seat-back, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Follow steps 1 through 4 of the
second row installation on pages
and .
You can find lower anchors in the
slits in the seat-backs.
The location of each lower anchor is
indicated by a small button above the
anchor point.
1.
2.
3.
4.
163
49 50
Installing a Child Seat
52
LOWER ANCHORS
10/01/26 18:31:53 31SZA620_057
2011 Pilot