HP DL785 User Manual
Page 65
system attributes. The System Insight Display LEDs identify components experiencing an error,
event, or failure.
CAUTION:
Do not block airflow by pushing the SID flush against the server while it is in the
down position.
IMPORTANT:
When removing the access panel to view the Systems Insight Display LEDs, leave
the server powered on. The Systems Insight Display LEDs are cleared when the server is powered
off.
NOTE:
The system management driver must be installed for the internal system health LED
to provide pre-failure and warranty conditions.
Component
LED
System power
POWER
Internal component health
INT HEALTH
External component health
EXT HEALTH
Over temperature
TEMP
Fan
FAN X
Power supply
PS X
I/O backplane power
IO BOARD
SPI board power
SPI BRD
SPI board not fully seated into the I/O backplane
SPI ILK
I/O backplane not fully seated into the midplane board
MP INTERLOCK
Processor memory board cell 8 (boot CPU) not fully seated into the midplane
board
CPU INTERLOCK
DIMM slot
PROCESSOR/MEMORY BOARD X
DIMM 1A-8D
System Insight Display LEDs
65