FUJITSU SERVIS KVM USB Emulation FS-1108AU/FS1108MU - Manual (Page 11)

8
3: For other cases
Status LED display
No AC power supply for the KVM Switch
(unplugged from power outlet, etc) Blinking green light for all ports
(at intervals of 40ms)
When ports that are not
used for the cascade
connection are being
selected Blinking blue light
(at intervals of 400ms) When the HOTKEY
mode is used
When ports that are used
for the cascade connection
are being selected Blinking orange light
(at intervals of 400ms)
When ports that are not
used for the cascade
connection are being
selected Blinking blue light
(approx. 1 time) When the [RESET]
switch is pressed
When ports that are used
for the cascade connection
are being selected Blinking orange light
(approx. 1 time)
When the [RESET] switch is pressed for a long
time (5 seconds or more) AU: Fades-in/fades-out in green
MU: Fades-in/fades-out in blue
When ports that are not
used for the cascade
connection are being
selected Blinking blue light
(Timing 1) When AutoScan is
performed
When ports that are
used for the cascade
connection are being
selected Blinking orange light
(Timing 1)
Supported language when performing simple
settings for the keyboard type (using one port
from ports 1-4) Blinking blue light
(at intervals of 400ms)
(Timing 1)