FUJITSU SERVIS KVM USB Emulation FS-1108AU/FS1108MU - Manual (Page 17)

1 4
Rack installation (8 port and 16 port types)
(1) Remove the console panel from the device.
(2) Attach the Rack Fixing Brackets to the device and the console panel.
Remove the 4 flat head screws
(2 screws on the right side and two screws on the left side)
Console panel
Device
Device side
Attach the Rack Fixing Brackets to the
device with the 6 Rack Fixing Bracket
Screws.
Console panel side
Attach the Rack Fixing Bracket
to the console panel with the 4
Rack Fixing Bracket Screws.
Rack Fixing Bracket
(Large)
Rack Fixing Bracket
(Small)