FUJITSU SERVIS KVM USB Emulation FS-1108AU/FS1108MU - Manual (Page 18)

1 5
(3) Attach the device and the operation panel to the rack.
* Rack Fixing Bracket Screws are not provided.
Attach the provided Wire Fixer as required on the desired location on the rear of the device,
and firmly attach the console panel connection cable to the device and console panel.
Device
Console panel
Rack front
view
Rack rear
view
* Rack Fixing Bracket Screws
(2 screws on the right side and
two screws on the left side)
* Rack Fixing Bracket Screws
(2 screws on the right side and
two screws on the left side)
The length of the cable
can be adjusted by the
position of the Wire Fixer.
Firmly attach the cable without putting
tension on the connector.