FUJITSU SERVIS KVM USB Emulation FS-1108AU/FS1108MU - Manual (Page 24)

2 1
10-2-2. 8 and 16 Port Type
(1) Attaching the Power Cord Clamp
The provided Power Cord Clamp is used to attach power cord.
After clamping the cable with the Power Cord Clamp, cut the excess part of the band for
the Power Cord Clamp.
AC Cable
(2) DC cable connection
As shown in the diagram below, connect the DC cable to the KVM Switch, and insert the
Power Cord Clamp into the round holes on the KVM Switch.
Power Cord Clamp
Power Cord Clamp