FUJITSU SERVIS KVM USB Emulation FS-1108AU/FS1108MU - Manual (Page 23)

2 0
10-2. Power Cord Clamp
10-2-1. 4 Port Type
(1) Attaching the Power Cord Clamp
The provided Power Cord Clamp is used to attach the DC cable of the AC Adapter.
After clamping the cable with the Power Cord Clamp, cut the excess part of the band for
the Power Cord Clamp.
DC cable of the AC Adapter
(2) DC cable connection
As shown in the diagram below, connect the DC cable to the KVM Switch, and insert the
Power Cord Clamp into the round holes on the KVM Switch.
Power Cord Clamp
Power Cord Clamp