Setting the date and time, 1setting the date and time – FujiFilm 2400 User Manual

Page 10

Advertising
background image

19

1

18

1

SETTING THE DATE AND TIME

➀

Use the “

ab

” button to select “DATE/ TIME”,

and

➁

press the “MENU/OK” button.

●

!

If you take the batteries out of the camera for 5
minutes or more, or remove the batteries during
setup, the camera settings may all revert to the
factory default values.

●

!

See P.59 for more information on the SET-UP menu.

➀

Check that the lens cover is open and then set
the Mode switch to “

E

”.

➁

Press the “MENU/OK” button to switch to the
menu screen.

➂

Use the “

d

” and “

c

” buttons to select MODE and

then use the “

ab

” button to select “SET-UP”.

➃

Press the “MENU/OK” button.

2

➀

Use the “

d

” or “

c

” button to select the item

you want to set (year, month, day, hour or
minute), and then use the “

ab

” button to

correct the setting.

➁

When you have completed the settings, press
the “MENU/OK” button.

●

!

You cannot set seconds.

●

!

When the time displayed passes “12:00:00”, the
AM/PM setting automatically switches.

➀

You can use the “

ab

” button to select the

order in which the date is displayed on the
LCD monitor.

➁

Select the desired order and then press the
“MENU/OK” button.

➂

When the SET-UP screen appears, use the
“

ab

” button to select “END”.

➃

Press the “MENU/OK” button to exit the SET-
UP screen.

●

!

After the camera has exited the “SET-UP” screen,
the LCD monitor switches off.

●

!

To set the time precisely, press the “MENU/ OK”
button when the time is at zero seconds.

3

If the date is cleared when you switch the
camera on, a confirmation screen appears. If
you selected “F”, proceed from step .

3

●

➀

●

➁

●

➃

●

➂

●

➀

●

➁

●

➀

●

➁

Year.Month.Day

Month/Day/Year

Day.Month.Year

4

Advertising