FujiFilm 2400 - Manual (Page 28)

55
4
54
2
This function allows you to select whether or not
the date of shooting is included on the print.
➀
Set the Mode Swich to “ D ”.
➁
Press the “MENU/ OK” button to display the
menu on the LCD monitor.
➂
Press “ d c ” buttons to select “ R DPOF”.
➀
Select “ TDATE ”.
➁
Press “ d ” or “ c ” button to specify “DATE ON” or
“DATE OFF”. This setting is then valid for all
the prints until the setting is changed.
●
! Before specifying any other settings, first specify
whether date is to be shown or not.
1
With the FinePix2400 ZOOM, you can order prints using the Digital Print Order Format
(DPOF).
You can use the DPOF to specify the following:
● The frames to be printed and the number of prints for each frame
● Imprinting of the date and time
This section gives a detailed description of how to order your prints with the FinePix2400
ZOOM.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
( ➡P.74)
Reset the DPOF settings.
( ➡P.75)
If you load a SmartMedia that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
( ➡P.75)
No more than 999 prints can be specified on the same SmartMedia.
, HOW TO SPECIFY PRINT OPTIONS
PLAYBACK MENU
● ➀ ● ➁
●
➂
● ➀ ● ➁
R DPOF DATE SETTING
PLAYBACK MENU