FujiFilm 2400 - Manual (Page 26)

51
4
50
Use the “ d ” or “ c ” button to select the image to
be protected.
When the “MENU/ OK” button is pressed, the
image is protected and the “
h ” icon appears on
the right of the screen. To remove the
protection, press the “MENU/OK” button again.
● ! Press the “BACK” button to cancel the protection
process and return to the menu. To exit the menu,
press the “BACK” button again.
4 3
To protect another image, repeat the
procedure from step
. 3
1 2
g SETTING AND REMOVING SINGLE FRAME PROTECTION
PLAYBACK MENU
Press the “MENU/ OK” button to display the
menu on the LCD monitor.
➀
Use the “ d ” or “ c ” button to select
“ g PROTECT ”.
➁
Use the “ a b ” button to select “FRAME
SET/RESET”.
➂
Press the “MENU/OK” button.
“PROTECT” is a setting that prevents images
from being accidentally erased. However, the
FORMAT function erases all stored images,
including protected images (
➡P.48).
● ➀
●
➁
● ➂