FujiFilm 2400 - Manual (Page 29)

57
4
56
3 2
➀
Use the “ d ” or “ c ” button to display the frame
for which you want to specify DPOF settings.
➁
Use the “ ab ” button to specify the number of prints.
● ! If you do not want a print of the frame, reset the
number of prints to “00”
●
! The setting is not saved until you press the “ d ” or
“ c ” button to move to another frame or press the
“MENU/OK” button.
● ! You can specify up to 99 prints for each frame.
Prints can be specified for up to 999 frames on the
same SmartMedia.
<To Continue>
When you have completed the settings, always
press the “MENU/ OK” button to confirm the
settings. The total number of prints is displayed on
the LCD monitor and then the menu screen
reappears. The “
R ” icon and the number of prints
are displayed for frames with DPOF specifications
and the “
T ” icon is also displayed if the date is set.
1
➀
Use the “ ab ” button to select “FRAME SET/
RESET”.
➁
Press the “MENU/OK” button.
● ! Always select whether or not to print the date or time
before specifying the DPOF setting.
● ! If you use “FRAME SET” and then use “SET ALL”,
the number of prints specification in “FRAME SET”
is cancelled.
● ➀ ● ➁ ● ➀ ● ➁
To use “FRAME SET/RESET” again, repeat
the procedure from step
. 2
<To Cancel>
Pressing the “BACK” button cancels only the
settings for the currently selected frame. The
settings for other frames are not cancelled.
4
R DPOF SET/RESET FRAME
PLAYBACK MENU
● ! “TOTAL” shows the total number of prints specified.