Setting the brightness (exposure compensation), Setting the brightness, Exposure compensation) – FujiFilm 2400 User Manual

Page 21: P.40), P.41), P.41), and, G setting the brightness (exposure compensation), B self-timer photography

Advertising
background image

41

3

40

●

!

The Brightness setting is disabled in the following
situations:

• When the flash is used in Auto or Red-Eye

Reduction mode

• When dark scenes are shot in Forced Flash mode

This setting can be specified when the
photography mode is set to “

C

”.

Use the Brightness setting to obtain the optimum
image brightness (exposure) when the subject is
much brighter or darker than the background.

●

There are 9 compensation levels (–0.9 to +1.5
EV in approx. +0.3 EV increments). See P.68
for a definition of EV.

◆

Subjects for Which Exposure Adjustment
is Particularly Effective

◆

Positive (+) Compensation

●

Copying of printed text (black characters
on white paper) (

+

1.5 EV)

●

Backlit portraits (

+

0.6 to

+

1.5 EV)

●

Very bright scenes (such as snowfields)
and highly reflective subjects (

+

0.9 EV)

●

Shots made up predominantly of the
sky. (

+

0.9 EV)

Negative (–) Compensation

●

Spotlit subjects, particularly against dark
backgrounds (–0.6 EV)

●

Copying of printed text (white characters
on black paper) (–0.6 EV)

●

Scenes with low reflectivity, such as
shots of pine trees or dark foliage (–0.6
EV)

✽ Settings given in parentheses are a general

guide.

The self-timer lamp lights for 5 seconds, blinks
for 5 seconds, then takes the picture.

The time remaining until the picture is taken is
counted down on the LCD monitor.

●

!

Self-timer mode is cancelled after you take the
picture.

●

!

To stop the self-timer, once it has started running,
press the “BACK” button.

B SELF-TIMER PHOTOGRAPHY

PHOTOGRAPHY MENU

G SETTING THE BRIGHTNESS (EXPOSURE COMPENSATION)

PHOTOGRAPHY MENU

3

4

Advertising