FOCUS Enhancements MR-HD100 - Manual (Page 113)

MR-HD100 Functions
MR-HD100 Media Recorder
93
• FREE RUN
This function causes the MR-HD100 to begin counting from
the value stored by
TC SET . To enter a value in TC SET :
1. Go to the SETUP menu.
2. Select the TC SET item.
3. Enter values using the Right soft key and Scroll Wheel.
4. Press the Select button to enter values and return to the
SETUP menu.
A number entered via TC SET is not stored or the MR-
HD100 begins counting using that number, until it is
selected and the display returns to the
SETUP menu.
• REGEN
When the MR-HD100 powers up in REGEN mode, it:
• Reads the timecode of the last track recorded.
• Adds 1 to the number.
• Stores the new timecode as the number that will be
assigned to the first frame of the next recording session.
If the drive is empty, i.e. no existing recordings, the MR-
HD100 uses the
TC SET value.