FOCUS Enhancements MR-HD100 - Manual (Page 185)

MR-HD100 with Other Devices
MR-HD100 Media Recorder
165
6. Put the MR-HD100 into Record mode and start recording.
The Settings page on the iPod now shows:
• MR-HD100 Status is recording,
• Current timecode,
• The number of the track being recorded,
7. Click on Clip Info .
The iPod displays the Clip info page with the template’s
metadata fields and/or their buttons. If Friendly Names
were assigned early, they appear.
This page is for logging clip-based - non TC Depend,
timecode dependent -- metadata.
8. Enter the metadata:
• For open data fields, click on the field: depending on
the data type, the iPod keyboard or number pad
appears.
• For metadata buttons, click on the button to display a
dropdown menu with its predefined values. Pick the
appropriate value.
9. Click Done . (Not shown in illustration.)
The data is fixed in the field and it is now possible to go
on to other metadata fields.
10. Repeat Steps 7, 8, and 9 until all metadata is specified.
11. Click one of the Update buttons.
The metadata is associated with the clip and immediately
uploaded and saved in the MR-HD100 database. This
metadata applies to the entire clip.
11
7
8