FOCUS Enhancements MR-HD100 - Manual (Page 58)

Quick Start
MR-HD100 Media Recorder
38
NORMAL Recording
1. Set the video camera to Camera or Cam mode.
2. Verify that an image appears in the viewfinder.
3. On the MR-HD100, press Record .
The MR-HD100 begins to record. The timecode value
displays on the screen.
4. Press Pause II once to put the MR-HD100 to Rec-Pause
mode.
5. Press Pause II again and the MR-HD100 begins to Record
again in the same clip.
6. Press Stop to stop the recording.
7. Press Record to begin recording a new clip.
Creating a New File without Dropping Frames
When in record mode, it is possible to break the recording into
a separate, new file without dropping frames.
While recording, press
Record again and the MR-HD100
automatically creates a new clip.
Record
Stop Pause