Recording timecode in the file – FOCUS Enhancements MR-HD100 User Manual
Page 61
MR-HD100 Media Recorder
41
7.
Now the MR-HD100 will respond to the camcorder’s tape
controls. The recording signal goes both to the tape in the
camera and to the MR-HD100.
Recording Timecode in the File
1.
Press the
Right
soft button several times until the
Timecode
screen appears.
2.
Select
EXT TC
in the SETUP menu.
This option records the video camera timecode in the
file. For other available timecode options refer to
To view the source timecode (TC) from the camera,
press the
DISP
key,
F2
default, until the format type
appears, e.g. 1080/60i TC.
EXT TC
When in EXT TC mode the MR-HD100 follows the
camera’s timecode, and the Drop/Non-Drop Frame in
System SETUP menu has no effect on the recorded
video's timecode.
Function keys
The tasks discussed above are available for
programming into the function keys. For information on
setting up function keys, refer to the section,
OPERATION
TIMECODE
EXT TC
FREE RUN
REC RUN
REGEN