Assigning clips to reels – FOCUS Enhancements MR-HD100 User Manual
Page 144
MR-HD100 Media Recorder
124
Assigning Clips to Reels
To enable this function,
REELS PREF
must be set to
FOLDER
: see
When a disk is formatted, the MR-HD100 creates 10 folders,
numbered 0-9, on the disk. Each folder is a
REEL
. Optionally,
another set of reels/folders 0 - 9 can be created within each of the
original reels.
For example: REEL 1 has a sub REEL 2 which is designated 1-2.
Reels can be assigned to a clip during record, stop, or playback.
The function keys can be set to assign video clips to particular reels
(folders). There are two functions for assigning clips to reels:
• REELS
To allocate a clip to one of the folder/reels
0
-
9
assign the
REELS
function to a function key.
To Select the reel that the clip should belong to, press the
REELS
function key to increments the reel that the current clip
is assigned to. The number of the reel appears in the lower
left-hand area of the display, just above the functions bar.
F4 Assigned to R3-3
F2 Assigned to REELS
F3 Assigned to R1-1
Function Bar
Current Reel