Erasing single frame 4 3 1 2 – FujiFilm 6900 User Manual
Page 20
2
39
38
ERASING SINGLE FRAME
4
3
1
2
➀
Set the Mode switch to “
2
”.
➁
Press the “MENU/OK” button to display the
menu screen on the monitor.
Select “FRAME” in the “
{
ERASE” menu and
press the “MENU/OK” button.
●
!
See P.81 for more information on Erasing all frames
and Formating.
●
!
Multi-frame playback (
➡P.37) is an easy way to
select images to be protected.
Press “
d
” or “
c
” button to display the image to
be erased.
Press the “MENU/OK” button to erase the
displayed image. When erasing is complete, the
next image appears and the “
™
”
message is displayed.
●
!
To cancel single-frame erase, press the “BACK”
button to return to the menu. To exit the menu
screen, press the “BACK” button again.
●
!
If “
¡
” is displayed, the image
protection must be removed to erase the image
(
➡P.84).
●
!
If the “
ß
” message is
displayed, DPOF is specified. When you press the
“MENU/OK” button, the image is erased and the
DPOF settings are updated.
To continue erasing images, repeat steps
, .
4
3
●
➁
●
➀