FujiFilm 6900 - Manual (Page 46)

4
91 90
4 3 1
➀
Use the “ a ” or “ b ” to select “FRAME SET”.
➁
Press the “MENU/OK” button.
●
! Before specifying “FRAME SET”, always specify
whether the date is set.
2
➀
Use “ d ” or “ c ” to display the frame to be specified.
➁
Use “ a ” or “ b ” to specify the number of prints.
The “ F ” icon and the number of prints is
displayed for the frames for which settings have
been confirmed. If the date has been set, the
“
k ” icon is also displayed.
● ! Using “ d ” or “ c ” to move forwards or backwards a
frame automatically confirms the setting.
To continue using “FRAME SET”, repeat
steps
● ➀
and
● ➁
.
<To Cancel the Settings>
Pressing the “BACK” only cancels the setting for
the currently selected frame. You cannot cancel
settings for frames other than the currently
selected frame. <To Apply the Settings>
When you have finished specifying the DPOF
settings, always press the “MENU/OK” button to
confirm the settings. The total number of prints
appears on the monitor and the menu screen
reappears.
●
! You can specify up to 99 prints for each frame. Also,
the maximum number of frames that can be specified
for printing on the same SmartMedia is 999.
●
! “TOTAL” shows the total number of prints specified.
● ➁ ● ➀
F DPOF SET FRAME
PLAYBACK MENU
● ➁ ● ➀