FujiFilm 6900 - Manual (Page 48)

5
95 94
3
A confirmation screen appears. To proceed,
press the “MENU/OK” button.
A confirmation screen will appear to protect all
images. Press the “MENU/OK” button.
` SET–UP MODE
e The table below explains the camera setting
5
Settings
Settings Display Explanation
FILE SIZE /
QUALITY
IMAGE
DISPLAY
AUTO POWER
SAVE
BEEP
DATE/TIME
FRAME NO.
LANGUAGE
RESET ALL
SET q
J
NORMAL
OFF
2 MIN
LOW
__
RENEW
ENGLISH
__
Use this option to set the number of recorded pixels (file
size) and quality (compression rate). See P.97 for details.
Use this setting to specify whether a preview image
(showing the photographed image) is displayed after a
picture is taken. See P.98 for details.
Use this setting to specify whether the camera is switched to
low power mode and then automatically switched off when
the camera controls are not being used. See P.100, 112 for
details.
Sets the volume of the tone emitted when the camera is used.
Sets the date and time. See P.22 for details.
Specifies whether the Frame No. Memory function is used.
See P.101 for details.
Select English or French as the language used for screen
display.
Resets all settings other than the date/time, custom white
balance measurement and EVF/LCD setting to the factory
default values. When you press “
c ”, a confirmation screen
appears. To proceed, press the “MENU/OK” button again.
Factory default
OFF/
POSTVIEW/
PREVIEW
2 MIN/5 MIN/OFF
LOW/HIGH/OFF
SET q
RENEW/CONT.
ENGLISH/
FRANCAIS
OK q
✽ See the next page for information on procedures.
F DPOF RESET ALL PLAYBACK MENU
2