FujiFilm 6900 - Manual (Page 50)

5
99 98
` IMAGE DISPLAY
This function allows you to select and record
images in the Continuous Shooting and Auto
Bracketing modes. However, preview zoom
cannot be used.
➀
Use “ d ” and “ c ” to select the images you do
not want to record.
➁
Press “ b ” to add or remove the “C” Mark.
Place an “C” mark under all the images you do
not want to record and then press the
“MENU/OK” button to record the remaining
images.
Selecting Recorded Images
1
2
This setting allows you to specify whether the
photographed image is displayed after you take
a picture.
OFF : The photographed image is automatically
recorded without being displayed.
POSTVIEW: The photographed image is displayed for
about 2 seconds and is then automatically
recorded.
PREVIEW: The photographed image is displayed
and you can then select whether to
record the image. You can also select
preview zoom and recorded images.
● Press “MENU/OK” to record the image.
● Press “BACK” to discard the image.
You can enlarge the preview to check the image
details.
➀
Use “ a ” or “ b ” to zoom in or out.
➁
Press the “DISP” button.
➂
Use the “ ab ” and “ dc ” buttons to zoom in on
different parts of the image.
➃
Press the “DISP” button again to revert to
zoomed display.
Preview Zoom
●
! Trimming in the preview image is not saved.
● ! The operation procedure is the same as for playback
zoom. (
➡P.35)
●
! In Continuous Shooting and Auto Bracketing modes,
images are displayed for a set time and then
automatically recorded even when “OFF” is selected
as the “IMAGE DISPLAY” setting.
● ➁ ● ➀ ● ➀
● ➃ ● ➂ ● ➁