FujiFilm 6900 - Manual (Page 36)

3
71 70
When you take a picture, the resulting shots are
displayed (
Acorrect exposure, Boverexposed,
Cunderexposed) and then automatically saved.
●
! The focus is determined for the first frame and
cannot be changed during shooting.
●
! The photographed images are displayed even when
“OFF” is selected as the “IMAGE DISPLAY” setting”
(
➡ P.98).
●
! It takes about 12 seconds to record the image data
(NORMAL: G).
If you want to select the shots to be recorded,
see P.98.
This mode can be selected in the “ 9 • 0 • - •
3 ” photography modes.
Use this feature to photograph the same image
with different exposure settings. Auto bracketing
automatically shoots 3 consecutive frames, one
of which is correctly exposed while the
remaining two are underexposed and
overexposed respectively by a set amount.
● The three available settings are ±1/3, ±2/3 and
±1 EV. See P.112 for more information on EVs.
This mode can be selected in the “ 9 • 0 • - • 3 ”
photography modes.
Use this setting when you want to take bright
pictures indoors without using a flash or when
you want to use a fast shutter speed. (to prevent
camera shake, etc.)
● Settings: 100, 200, 400
●
! Flash photography cannot be used.
● ! This feature always takes 3 shots. However, if there
is insufficient space on the SmartMedia for 3 shots,
no picture will be taken.
R SETTING THE SENSITIVITY | AUTO BRACKETING
PHOTOGRAPHY MENU PHOTOGRAPHY MENU
Continuous shooting
Auto bracketing
Blank (OFF)
After selecting AUTO BRACKETING, press the
“6” button so that the “
” icon appears on the
screen. The mode switches (6 • • Blank)
each time you press the “6” button.
2 1 3