FujiFilm 6900 - Manual (Page 42)

4
83 82
1
Press the “MENU/OK” button to display the
menu on the monitor.
● ! The Auto Power Off function does not operate during
playback.
●
! Movie playback begins automatically. When playback
ends, the camera advances to the next frame.
➀
Press “ d ” or “ c ” to select “ } PLAYBACK”.
➁
Press the “MENU/OK” button. The image
frames are automatically advanced and
played back.
●
! If you press the “DISP” button once during playback,
the playback frame number is displayed on the
monitor.
●
! To interrupt “}PLAYBACK”, press the “BACK” button.
2 2 3
➀
Press “ d ” or “ c ” to select “ { ERASE”.
➁
Use the “ a ” and “ b ” buttons to select
“FRAME”, “ALL FRAMES” or “FORMAT”.
➂
Press the “MENU/OK” button.
A confirmation screen appears.
If you are erasing all the frames, or formatting
the card, press the “MENU/OK” button to proceed.
If you are erasing one frame, use the “
d ” and
“ c ” buttons to select the frame and then press
the “MENU/OK” button.
●
! To cancel “{ ERASE”, press the “BACK” button.
● ! If the “
å
” message is
displayed, DPOF is specified. When you press the
“MENU/OK” button, the image is erased.
Formatting erases all the data on the
SmartMedia, including protected files.
● ➁ ● ➀ ● ➀
● ➁
● ➂
{ ERASING SINGLE
•
ALL FRAMES/FORMATTING PLAYBACK MENU
} PLAYBACK (AUTOMATIC PLAYBACK)
PLAYBACK MENU