Using an external flash – FujiFilm 6900 User Manual
Page 38
![background image](/manuals/101258/38/background.png)
3
75
74
MODE
SELECT
F
ISO
AUTO
3
4
1
2
This mode can be selected in the “
9
•
0
•
-
•
3
”
photography modes.
Set this setting to “ON” when you are using an
external flash.
●
Synchronization speed: Up to 1/1000 sec.
➀
Close the built-in flash.
➁
Mount the external flash on the camera’s hot
shoe.
●
!
Built-in and external flash units cannot be used at
the same time.
◆
Compatible Flash Units
◆
Flash units that can be used with this camera
must meet the following 3 conditions :
●
The aperture can be set.
●
External flash synchronization can be used.
●
The sensitivity can be set.
●
!
Set the white balance (
➡P.66) to AUTO or Custom
White Balance (
➡P.76).
Select “
9
•
0
•
-
” (
➡P.44) or “
3
” (
➡P.46).
However, the use of “
-
” or “
3
” mode is
recommended.
When you are using an external flash, always
specify a fixed aperture setting.
External Flash Settings
For external flash, refer to the user’s manual for the
flash and specify the settings as described below.
●
Match the settings to the camera aperture
setting. In “
9
” or “
0
” mode, match the settings
to the aperture measured by the camera.
●
Match the sensitivity setting (
➡P.70) to the
setting on the camera.
●
Select External Flash mode (TTL mode cannot
be used).
●
!
Flash photography cannot be used when continuous
shooting (
➡P.61) or auto bracketing (➡P.70) is
selected.
●
➀
●
➁
?
USING AN EXTERNAL FLASH
PHOTOGRAPHY MENU