Furuno FA-150 - Manual (Page 33)

1. OPERATION
1-22
1.7.5 Own dynamic data display
The OWN DYNAMIC DATA display shows your ship’s dynamic data, which
includes time, date, ship’s position, course over ground (COG), speed over
ground (SOG), rate of turn (ROT), and heading.
The OOW should periodically check position, speed over ground and sensor
information.
At the plotter display, press the DISP key three times to show the OWN
DYNAMIC DATA display.
[OWN DYNAMIC DATA]
01/MAY/2004 13:24:55
LAT : 34
°45.2132' N
LON : 135
°21.2345' E
SOG: 8.1 kt INT GPS
COG: 118.5
° HDG:118°
ROT: R10.3
°/min*
PA: H RAIM: USE
Date, time
Latitude
Longitude
Speed over ground
Course over ground, Heading
Rate of turn
Position accuracy
(H: High, L: Low),
RAIM status
(USE or UNUSE)
Antenna marker flashes when transmitting
* = If no ROT device is connected and HDG
sentence is input from a gyrocompass, etc.,
the following is displayed:
Rate of turn less than 10
°/min.: 0.0
Rate of turn 10
°/min. rightward or higher: R>10
Rate of turn 10 °/min. leftward or higher: L>10
GPS receiver in use
INT GPS:
Internal GPS
INT DGPS: Internal DGPS
EXT GPS:
External GPS
EXT DGPS: External DGPS
NO FIX:
No position fix
OWN DYNAMIC DATA display
1.7.6 Alarm status display
The alarm status display shows the date and time alarms were violated. For
further details, see paragraph 2.5.