Furuno FA-150 - Manual (Page 84)

FURUNO
FA-150
SP-1 E4431S01E
070514
SPECIFICATIONS OF THE UAIS TRANSPONDER
FA-150
1. TRANSPONDER UNIT
1.1 TX/RX Frequency 156.025 MHz to 162.025 MHz
1.2 Output Power 1W, 2 W, 12.5 W, selectable
1.3 Impedance 50 ohms
1.4 DSC Receiver CH70 fixed, 156.525 MHz, G2B, 1200 bps
1.5 Bandwidth 25 kHz/ 12.5 kHz
2. MONITOR UNIT
2.1 Display 4.5-inch, monochrome LCD
2.2 Display Size 60 (H) x 95 (W) mm
2.3 No. of Dots 120 x 64 dots
3. GPS RECEIVER
3.1 Receiving Channels 12 channels parallel, 12 satellites tracking
3.2 Rx Frequency/ Rx Code 1575.42 MHz, C/A code
3.3 Position Fixing System All in view, 8-state Kalman filter
3.4 Position Accuracy Approx. 10 m, 95% of the time, (HDOP ≤ 4)
DGPS: approx. less than 5 m, 95% of the time
3.5 Tracking Velocity 900 kts
3.6 Position-fixing Time Warm start: 36 seconds, Cold start: 43 seconds
3.7 Position Update Interval 1 second
3.8 DGPS Data Receiving RTCM SC-104 Ver 2.1 formatted
4. INTERFACES
4.1 COM1 – COM4 IEC 61162-1(2000-07)/61162-2(1998-09)
Input: VSD, SSD, ABM, BBM, ACA, ACK, AIR, DTM, GBS, GGA, GLL,
GNS, HDT, LRF, LRI, OSD, RMC, ROT, VBW, VTG
Output: VDM, VDO, ABK, ACA, ALR, TXT, LR1, LR2, LR3, LRF, LRI
Note: COM4 also functions as SENSOR input.
4.2 SENSOR (input) IEC 61162-1(2000-07)/61162-2(1998-09)
4.3 COM4 – 6 (input) DTM, GNS, GLL, GGA, RMC, VBW, VTG, OSD, HDT, GBS, ROT
4.4 External Beacon RS-232C (PC)
4.5 PC RS-232C
4.6 Alarm Output Contact closure
4.7 AD-10 AD-10 format (FURUNO gyro format)