Furuno GD-1700C - Manual (Page 172)

5. CUSTOMIZING YOUR UNIT
5-2
Contents of general setup menu
Item Description Settings
Key Beep Turns key beep on/off. On, Off
Language Chooses menu language. English, French,
German, Italian,
Portuguese, Spanish
Range Unit Chooses unit of range and speed
measurement. nm, kt; km, km/h; sm,
mph; nm & yd, kt; nm &
m, kt; km & m, km/h; sm
& yd, mph
Temperature Unit Chooses unit of water temperature
measurement.
°C,°F
Depth Unit Chooses unit of depth measurement. ft, m, fa, P/B
(Passi/Braza)
Temperature
Source Chooses source of water temperature data. ETR, NMEA. Select ETR
to show water
temperature data fed
from the network
sounder.
Depth Source Chooses source of depth data. ETR, NMEA. Select ETR
to show depth data fed
from the network
sounder.
Reset Trip Log Resets distance run to zero. Yes, No
Sped Source Chooses source of own ship’s speed data. ETR, NMEA
Lat/Lon Display Chooses how many digits (or seconds) to
display after decimal point in latitude and
longitude position. DD°MM.MM’,
DD°MM.MMM’,
DD°MM.MMMM’,
DD°MM’SS.S”
TD Display Chooses TD type. Loran C, Decca
Speed Chooses speed format to display. SOG (Speed over
ground), STW (Speed
through water)
Position Display Chooses position display format. LAT/LON, TD
Time Display Chooses time notation. 12 hours, 24 hours
Infrared Remote
Mode A remote controller can be set exclusively for
use with a specific display unit, in the case
of multiple NavNet display units. For further
details see the Installation Manual. A, B, C, D
(Con’t on next page)