Furuno GD-1700C - Manual (Page 64)

2. PLOTTER OPERATION
2-30
7. Press the MARK SHAPE soft key to open the mark shape selection window.
SELECT MARK
Waypoint mark shape selection window
8. Operate the cursor pad to select shape desired.
9. Press the ENTER soft key.
10. For the GD-1700C/1710C, press the SELECT MARK and MARK COLOR
soft keys in that order to open the waypoint mark color selection window.
Select color desired, then press the ENTER soft key.
SELECT COLOR
▲
¤ RED
¡ YELLOW
¡ GREEN
¡ LIGHT BLUE
¡ PURPLE
¡ BLUE
¡ WHITE
▼
Waypoint mark color selection window
Note: You cannot change the shape and color of a waypoint when the
proximity alarm radius for it is other than “zero.” To change shape or
color, enter all zeroes as the proximity alarm radius.
12. You can change the name (1 to 6 characters), comment (13 characters), L/L
position and the proximity alarm radius for a waypoint as follows:
a) Use the cursor pad to select the NAME, COMMENT, position box or
PROXIMITY ALARM RADIUS field. (“Proximity alarm radius” provides for
visual and aural alarms when your boat nears a waypoint by the distance
specified. The proximity alarm must be turned on in the ALARM menu to
use this feature. For details see the paragraph “2.11.6 Proximity alarm.”)
b) Use the cursor pad to select location.
c) Rotate the [ENTER] knob to select appropriate alphanumeric character.
13. Press the SAVE soft key to register the waypoint.
14. Enter another waypoint, or press the [MENU] key to close the menu.