Furuno GD-1700C - Manual (Page 39)

2. PLOTTER OPERATION
2-5
2.1.3 Highway display
The highway display, shown in combination displays, provides a graphic
presentation of ship’s track along intended course. It is useful for monitoring
ship’s progress toward a waypoint. The own ship marker shows relation between
ship and intended course. The XTE monitor shows the direction and amount
your vessel is off course – the arrow shows the direction to steer to return to
your course and the numeric the distance you are off course. Using the figure
below as an example, you would steer right 0.009 nm to return to course. To
maintain course, steer the vessel so the own ship marker stays aligned with the
intended course line.
Time-to-go
to destination
Range to
destination waypoint
Estimated time of
arrival at destination
0.9 nm
WPT001
003WPT
0D 9H 59M TTG 23th23:59 ETA
SOG 10.0 kt 10.0 kt STW
RNG 9 9 . 9 n m
Destination
waypoint
Own ship marker
Speed over ground, speed through water
XTE monitor
0 . 0 0 9 n m 0.9 nm XTE range
Intended
course
Destination waypoint
Direction to steer (green on color model)
Shown (in red on color model) when
direction to steer is "left."
Highway display
Soft keys
EDIT XT-LMT : Sets the range for XTE monitor scale. See the procedure on the
previous page for how to set.
RESET XTE:
Enables you to restart navigation, when a destination is set. Press
the EDIT XT-LMT soft key followed by the RESET XTE soft key. See “Soft keys”
on the previous page for details.