FOCUS Enhancements TView Quad Scan Manual - Manual (Page 19)

TView QuadScan User's Manual 0092-5000-200
19
3.5.3 Composite Pass Through (Toggle) (Not available from IR remote mouse)
This control determines whether the Composite television input on Channel A is routed through to Channel B or not.
If the signal is “passed through” Composite television that is input on Channel A will appear as an output on Channel B.
If the signal is not passed through, Channel B Composite television will be configured as a second Composite television
input. The default is Channel B configured as an input.
Composite Channel B Configuration is indicated by “COMP B=PASS” or “COMP B=IN” on the QuadScan’s Front
Panel Display.
3.6 Output Sync Signal Configuration
3.6.1 Output Sync Signal Configuration (Multiple) (Not available from IR remote mouse)
This control determines where output video synchronization signals will be placed
Output Sync Front Panel Designation
Separate H and V (pins 13 and 14) Osync= 5WIRE
Separate Composite (pin 14) Osync= 4WIRE
Composite Sync on Green (pin 2) Osync= 3WIRE
The Default is Separate Composite Sync (H and V) on pin 2.
3.7 Display Device Configuration
3.7.1 Display Device Configuration (Multiple) (Not available from IR remote mouse)
The Display Device Configuration operates in conjunction with the Input Aspect Ratio and the Output Screen
Aspect Ratio to provide the correct scaling for the particular output. Several resolutions are supported as follows:
Resolution Aspect Ratio Mode Title
720 x 480 (NTSC) 4:3 DBL TV
720 x 576 (PAL) 4:3 DBL TV
640 x 480 4:3 VGA
800 x 600 4:3 SVGA
1024 x 768 4:3 XGA
720 x 720 (NTSC) 16:9 TRIPLE TV
720 x 864 (PAL) 16:9 TRIPLE TV
720 x 960 (NTSC) 16:9 QUAD TV
720 x 1152 (PAL) 16:9 QUAD TV
1280 x 720 16:9 HDTV
1365 x 1024 4:3 D-ILA
The Default is DBL TV **