FOCUS Enhancements TView Quad Scan Manual - Manual (Page 8)

TView QuadScan User's Manual 0092-5000-200
8
1.3 Operational Specifications
1.3.1 Input Signal Formats
2 channels of base band NTSC or PAL (automatically recognized) composite BNC Female (1)
2 channels of NTSC or PAL (automatically recognized) S-VHS (Y/C) 4 pin Mini-DIN Female
2 channels of Component (Y,R-Y,B-Y or YPbPr) (European or NTSC timing) BNC Female (3)
1 channel of HD-15 VGA pass through
HD-15 Male
THE QUADSCAN DOES NOT SUPPORT NON-INTERLACED INPUT.
1.3.2 Output Signal Formats
Hi Resolution RGB (RGBH and V shall appear on pins 1,2,3,13, and 14 ) HD-15 Female
Component YPbPr (HDTV Style; Pr, Y, Pb appear on pins 1,2,3 ) HD-15 Female
(YPbPr available by special order only)
1.3.3 Output Resolutions
Resolution Color Space Aspect Ratio Mode Title **
720 x 480 (NTSC) RGB 4:3 DBL TV
720 x 576 (PAL) RGB 4:3 DBL TV
640 x 480 RGB 4:3 VGA
800 x 600 RGB 4:3 SVGA
1024 x 768 RGB 4:3 XGA
720 x 720 (NTSC) RGB 16:9 TRIPLE TV
720 x 864 (PAL) RGB 16:9 TRIPLE TV
720 x 960 (NTSC) RGB 16:9 QUAD TV
720 x 1152 (PAL) RGB 16:9 QUAD TV
1280 x 720 RGB 16:9 HDTV
1365 x 1024 RGB 4:3 D-ILA
VGA pass through is an analog pass through of the VGA input connected to the QuadScan’s VGA IN connector.
When VGA pass through is selected, the VGA input ( Red Green Blue, H Sync and V Sync) is passed directly
through to the HI-RES OUT connector. No resolution scaling or signal processing is performed.
THE QUADSCAN DOES NOT SUPPORT INTERLACED OUTPUT.
1.3.4 Motion Compensation Modes
Motion Video (from 2 field interlaced video image acquisition)
Film (3:2 Pull Down) (from 24 fps film image acquisition)
Static Video
Automatically detect and process Motion Video, 3:2 Pulldown or Static Video