Frymaster FLAT BOTTOM 2424G - Manual (Page 23)

24G SERIES FLATBOTTOM GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1-18
10. Remove firebox back, along with
insulation from back of frypot. From the
rear of the unit, use a prying bar to
carefully pry the top assembly from the
frypot and cabinet frame (single units
only), and set aside. (The top assembly is
secured to the frypot with high-temp
silicone sealant.) On systems, remove
individual pieces on the frypot being
removed.
11. Pull the frypot back and up to remove. On
fryers with built-in filtration systems,
ensure the front oil-return inlet is clear of
the firebox front before lifting frypot out
of cabinet.
If the Firebox Requires Replacement:
12. Remove screws (12) securing the firebox
to the cabinet braces (arrows). Lift the
firebox assembly back and up to remove
from cabinet.
Remove the
firebox back and
insulation from
back of frypot.
Use a prying bar
to remove top
assembly from
frypot (single
units only).
Remove screws (arrows) securing the firebox to
the cabinet.