Fujitsu Siemens Computers Connectivity Peripherals Point 1600 - Manual (Page 26)

2-10 Assembling and Installing Connectivity Peripherals
To install the AC adapter in the cradle base,
1. Turn the cradle base upside down.
2. Detach one end of the Velcro strap and insert the AC adapter into the cavity in the bottom of the
cradle base as shown in Figure 2-8.
3. Reattach the velcro strap to secure the AC adapter.
4. Attach the DC power cable from the AC adapter to the DC input connector on the cradle module.
5. Coil the DC supply cable of the AC adapter into “figure-eight” loops as shown in Figure 2-8 and tie
the coiled cable using the twist tie provided with the AC adapter. Ensure that there is enough slack in
the cable to allow the cradle module to pivot to the fully tilted position.
The high-usage cradle is now ready for installation at the work site.
Figure 2-8. High-Usage Cradle Bottom View
Velcro
Strap
Keyboard
Mouse
DC Input Port
Port
AC Adapter
AC Power Cable
Cutouts (for cable routing)
Mounting Holes
(Tie excess cable here.)
Cutouts (for cable routing) Cutouts (for cable routing)