6, figure 2, Figure 2-18, D figure 2-1 – Fujitsu Siemens Computers Connectivity Peripherals Point 1600 User Manual
Page 41
Advertising
Installing the Wall-Mount Cradle
2-25
Figure 2-17. Attaching Keyboard Tray Assembly to Mounting Plate (Left Side)
Figure 2-18. Attaching Keyboard Tray Assembly to Mounting Plate (Bottom)
13. Fasten the cradle module to the mounting plate using the two (size #6) screws provided with the
wall-mount cradle, shown in Figure 2-15 on page 2-23. To ensure proper alignment of the cradle
module, push the cradle module toward the wall while you tighten the screws.
Tighten
Push
Tighten
Advertising
This manual is related to the following products: