Fujitsu Siemens Computers Connectivity Peripherals Point 1600 - Manual (Page 42)

2-26 Assembling and Installing Connectivity Peripherals
14. Tighten the two (size #10) screws, one on each side, that you installed in step 9 to fasten the cradle
module to the keyboard tray assembly. To ensure proper alignment, push the cradle module toward
the wall as shown in Figure 2-19 and Figure 2-20 while you tighten the screws.
Figure 2-19. Fastening Cradle Module (Left Side)
Figure 2-20. Fastening Cradle Module (Right Side)
Tighten
Push
Tighten
Push