Fujitsu Siemens Computers Connectivity Peripherals Point 1600 - Manual (Page 36)

2-20 Assembling and Installing Connectivity Peripherals
To prepare the installation site for the wall-mount cradle,
1. Determine the appropriate location for the wall-mount cradle. Account for the following factors
when selecting the location:
• The wall-mount cradle protrudes from the wall about 3.5 inches with the keyboard tray in the
closed position and about 10 inches with the keyboard tray in the open position. Ensure that the
location you choose is compliant with local building codes and does not obstruct other activities
in the work area.
• The wall-mount cradle mounting plate is designed to attach to a standard 2-wide electrical
junction box. Electrical AC power must be supplied to the wall-mount cradle via the junction box.
Consider the accessibility, routing, and electrical and building code requirements for AC wiring
in the building.
2. Install the standard 2-wide electrical junction box in the desired location and route AC supply wire
to the junction box. A metal junction box must be used and it must be grounded in accordance with
electrical and building codes.
Use the mounting plate template provided with the wall-mount cradle to determine the appropriate
height and location of the junction box. The template indicates the location of mounting holes and
the cut-out for the junction box in the mounting plate. Ensure that the height of the junction box
allows the user to easily see the pen tablet display screen and access the keyboard. (The template
indicates the center of the pen tablet screen when the pen tablet is in the cradle.)
Warning
Shut off power before working on a circuit. Use approved
materials and conform to all electrical codes.