Fujitsu Siemens Computers Connectivity Peripherals Point 1600 - Manual (Page 16)

1-6 Introduction to Connectivity Peripherals
Wall-Mount Cradle 1
The wall-mount cradle provides a folding keyboard tray and can be located in hallways or other wall
areas to give mobile workers a convenient place to store the pen tablet, input data with a keyboard and
connect the pen tablet to an external power source. Locking versions are equipped with a tubular lock
which allows you to lock the pen tablet into the cradle. The wall-mount cradle is assembled using a cradle
module, wall-mount base, and a keyboard.
Charge-Only Cradle 1
The charge-only cradle is designed for a desk-top or counter-top installation where a quick connection to
a DC power source is needed. The pen tablet can be placed in the charge-only cradle and used while
external DC power is supplied by the cradle. The cradle accommodates the pen tablet with or without the
hand strap (FMWHS5) attached. The connector pins on the cradle are “high-usage” type connectors and
are designed to withstand a large number of insertion and removal operations. The charge-only cradle is
shipped from the factory fully assembled. An AC adapter (shipped with the pen tablet and also sold
separately) is required to provide power to the cradle.
Wall-Mount Cradle Wall-Mount
Base
Cradle Module
= +
Assembled Package Components
with keyboard (keyboard sold separately)
Charge-Only
Cradle