Frymaster 2836 Series - Manual (Page 6)

1-2
1.1 General
Read the instructions in this manual thoroughly before attempting to operate this equipment. This
manual covers 2836 Series Electric Fryers without a float switch manufactured after May 2005.
2836 Series electric fryers feature easy to clean, open frypots with tilt-up elements. The fryers are
controlled by multi-product cooking computers and come in full-pot configurations.
1.2 Safety Information
Before attempting to operate your unit, read the instructions in this manual thoroughly.
Throughout this manual, you will find notations enclosed in double-bordered boxes similar to the
ones below.
CAUTION
CAUTION boxes contain information about actions or conditions that may cause or result in a
malfunction of your system.
WARNING
WARNING boxes contain information about actions or conditions that may cause or result in
damage to your system, and which may cause your system to malfunction.
DANGER
DANGER boxes contain information about actions or conditions that may cause or result in injury
to personnel, and which may cause damage to your system and/or cause your system to malfunction.
Fryers in this series are equipped with automatic safety features:
1. A single high-temperature detection feature shuts off power to the elements should the
temperature controls fail.
If the computer display shows , or , the fryer is malfunctioning. Press the
ON/OFF switch to the “OFF” position (the LED displays on the computer go dark) or
disconnect the fryer from the electrical power supply. Do not operate the fryer until an FASC
technician has serviced it.
NOTE: 2836 Series fryers may have more than one power cord. Whenever disconnecting the
fryer from the electrical power supply, verify that all cords have been disconnected or that all
circuit breakers have been turned off.
2. Drain safety switches on the frypot drain valves will not allow the elements to be energized
unless each drain valve is completely closed. Opening a drain valve will cause the elements to
be de-energized.