Fostex MR-8CD - Manual (Page 121)

121
MR-8HD/CD Owner’s Manual (Part editing)
5) Rotate the [MENU/ENTER] knob to select
"Change Part " in the second page, and press
the [MENU/ENTER] knob.
The display now shows the screen for
selecting the source track(s) and destination
track(s) of the exchange operation.
Initially, "
Back " is highlighted.
6) Rotate the [MENU/ENTER] knob to select
"Source Track=*", and press the [MENU/ENTER]
knob.
You can now select the exchange source track(s)
by rotating the [
MENU/ENTER ] knob.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
7) Rotate the [MENU/ENTER] knob to select the
source track(s) to be exchanged, and press the
[MENU/ENTER] knob.
You can now select the exchange destination
track(s) by rotating the [
MENU/ENTER ] knob.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
1) Load the song you want to edit.
2) Set the LOCATE A and LOCATE B points (see
page 49).
You can check the parts by playing back
between the LOCATE A and LOCATE B points
(see page 44).
3) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "
Back " is
highlighted initially (selecting " Back " returns
to the previous screen).
You can exchange the parts between the desired tracks. The part exchange operation can be
made only within the current song.
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
LOCATE A
point
LOCATE B
point
ABS ZERO REC END
<Note>: You cannot exchange data of a song pro-
tected. Release the protection before exchanging
parts.
4) Rotate the [MENU/ENTER] knob to select
"Part Edit ", and press the [MENU/ENTER] knob.
The display now shows the part edit menu
screen, where "
Back " is highlighted.
<Note>: You cannot select the same track(s)
for the exchange source and destination.
Exchange the part(s)
Flashing