Fostex MR-8CD - Manual (Page 122)

122
MR-8HD/CD Owner’s Manual (Part editing)
10) Press the [MENU/ENTER] knob.
The display now returns to the part edit menu
screen, where “
Change Part ” is highlighted.
11) Press the [STOP] key to exit the menu mode.
8) Rotate the [MENU/ENTER] knob to select the
destination track(s), and press the
[MENU/ENTER] knob.
The display shows the screen where
"
Dest. Track = ** " is highlighted.
<Note>: If you are not satisfied with the re-
sult, press the [ UNDO/REDO ] key to undo the
operation (see page 111).
9) Rotate the [MENU/ENTER] knob to move the
cursor to "[ENTER]" on the screen, and press the
[MENU/ENTER] knob.
The display shows " Please Wait ", immediately
followed by " Completed " when the MR-8HD/
CD completes the exchange operation.
If you want to cancel the exchange operation,
move the cursor to "
[CANCEL] " on the screen,
and press the [ MENU/ENTER ] knob.
Flashing
Flashing
Flashing