Troubles for playback – Fostex MR-8CD User Manual

Page 133

Advertising
background image

133

MR-8HD/CD

Owner’s Manual (Troubleshooting)

<Trouble 8>

I cannot execute auto punch in/out.

•

Is "

" shown on the screen?

If it is not, press the [AUTO PUNCH] key to make
the auto punch in/out function active.

•

Are the punch-in and punch-out points set
correctly?

To check each point, press the [LOCATE A/IN] or
[LOCATE B/OUT] key. The recorder locates to the
punch-in or punch-out point, while the screen shows
the appropriate time data.

If the punch-out point is earlier than the punch-in
point, set these points appropriately so that the
punch-in point is earlier than the punch-out point.

<Trouble 1>

During playback, the recorder suddenly executes locat-
ing.

•

Is "

" or "

" shown on the

display?

If so, the play mode is set to the auto return or loop
mode.
Press the [PLAY MODE] key until "Off" is selected.

<Trouble 2>

Cannot monitor the playback sound.

•

Are the track fader(s) for the playback
track(s) and the [MASTER] fader brought up
to the appropriate positions?

Raise the fader(s) for the track(s) you want to
monitor, as well as the [MASTER] fader.
If you monitor via headphones, also raise the
[PHONES VOL] control.

<Trouble 9>

I cannot record audio data of a song onto an external
digital recorder.

•

Is the connection between the
[DIGITAL OUT] connector on the
MR-8HD/CD and the optical input
connector of the digital recorder made
correctly?

Check the connection, as well as the optical cable.

•

Is the digital recorder set correctly for
recording the signal fed to the digital input?

See the manual of the digital recorder for details
about the setting.

<Trouble 3>

I press the [PLAY] key while holding down the [STOP]
key, but I cannot execute loop playback.

•

Are the LOCATE A and LOCATE B points
set correctly?

By default, both of these points are set to the
beginning of a song (i.e. "0m 00s 000ms" or "-2bar
1beat 00clk"). In this condition, you cannot execute
loop playback.
Also, if the LOCATE B point is earlier than the
LOCATE A point, you cannot execute loop playback.

Troubles for playback

Advertising