Fisher & Paykel DishDrawer - Manual (Page 15)

13
The Salt Reservoir
Water softening can only take place when there is salt in the reservoir.
The salt reservoir must be filled prior to using the and
whenever the salt reservoir indicator light is red.
Salt Indicator Light
If the salt indicator light is red, the salt reservoir is empty.
If the salt indicator light is black, there is enough salt in the
reservoir for the wash program that has been selected.
Prefinished Models: The electronic display will also indicate
when the salt reservoir is empty by displaying the salt
symbol.
How to Fill the Salt Reservoir
1. Open the .
2. Unscrew the salt reservoir plug by turning counter-clockwise.
3. Place the salt into the salt container and pour the contents into the
salt reservoir. The salt reservoir can hold up to approximately
1lb of salt.
4. Fit the cap tightly back into its original position.
5. If you do not wash your dishes immediately after filling the salt
reservoir, run a rinse program to remove any salt water or
spilt granules.
WARNING
Do not pour detergent or rinse agent into the salt
reservoir. Detergent and rinse agent will destroy the
water softener.
Note
When filling the salt dispenser, you may notice water being displaced
from the water softener overflow.
SALT ONLY
detergent rinse aid