Fisher & Paykel DishDrawer User Manual
Page 20
o p t i o n a d j u s t m e n t m o d e
Integrated Models
1. Enter the Option Adjustment Mode as explained previously.
2. Press the START/PAUSE button until the lights above the
START/PAUSE button is green and the ECO button is red. If it is not,
press the POWER button to start again.
3. Press the LOCK button to turn the End of Wash Program Beeps on
or off as desired. The End of Wash Program Beeps have been turned
off if all the red lights on the wash program indicator are off.
4. Press the POWER button to return to the Normal Operating Mode.
Beeps On
Beeps Off
Prefinished Models
1. Enter the Option Adjustment Mode as explained previously.
2. Press the START/PAUSE button until the letters ‘EC’ appear on the
Electronic Display.
3. Press the LOCK button to turn the End of Wash Program Beeps on
or off as desired. The brush symbol is not present on the Electronic
Display when the End of Wash Program Beeps have been turned off.
4. Press the POWER button to return to the Normal Operating Mode.
Electronic display
Beeps On
Beeps Off
The factory has programmed the
to beep six times at the end of the wash program. This feature can be turned off.
How to Remove the End of Wash Program Beeps
Integrated Models
1. Enter the Option Adjustment Mode as explained previously.
2. Press the START/PAUSE button until the lights above the
START/PAUSE button is orange and the ECO button is red. If it is not,
press the POWER button to return to Normal Operating Mode and
start again.
3. Press the LOCK button to turn the Auto Power feature on or off. If
all the red lights on the wash program indicator are off then the Auto
Power feature has been turned off.
4. Press the POWER button to return to the Normal Operating Mode.
Auto Power On
Auto Power Off
Prefinished Models
1. Enter the Option Adjustment Mode as explained previously.
2. Press the START/PAUSE button until the letters ’AP’ appear on the
electronic display.
3. Press the LOCK button to turn the Auto Power feature on or off.
The brush symbol is not present on the electronic display when the
Auto Power feature has been turned off.
4. Press the POWER button to return to the Normal Operating Mode.
Electronic display
Auto Power On
Auto Power Off
When the
leaves the factory, it is programmed to automatically turn itself on whenever the drawer is opened. The
will not start washing until the drawer is closed and the START/PAUSE button has been pressed. If you do not want the
to turn
itself on automatically, this feature can be turned off.
How to Remove the Auto Power Option