Fisher & Paykel DishDrawer - Manual (Page 19)

17
o p t i o n a d j u s t m e n t m o d e
Integrated Models
1. Enter the Option Adjustment Mode as explained previously. The
light above the START/PAUSE button is red to indicate this setting has
been chosen.
2. The current rinse agent setting is shown on the wash program
indicator in red lights. If four red lights are lit on the wash program
indicator then the rinse agent setting is at four.
3. Press the LOCK button to increase or decrease the rinse agent
setting, the red lights will scroll up to 5 and then start from 1 again.
4. Once you have selected the desired rinse agent setting, press the
POWER button to return to the Normal Operating Mode.
Example of Rinse Agent set to 4.
Prefinished Models
1. Enter the Option Adjustment Mode as explained previously. The
letters "rA" will be shown on the Electronic Display.
2. The current rinse aid setting is shown on the wash program
indicator in red lights. If four red lights are lit on the wash program
indicator then the rinse agent setting is at four.
3. Press the LOCK button to increase or decrease the rinse agent
setting, the red lights will scroll up to 5 and then start from 1 again.
4. Once you have selected the desired rinse agent setting, press the
POWER button to return to the Normal Operating Mode.
Electronic display
Example of Rinse Agent set to 4.
How to Adjust the Rinse Agent Setting
After using the you may want to change some of the
preset options to suit your needs. The settings for Rinse Agent, Water
Softener, Auto Power, End of Wash Program Beeps, Closed Drawer
and Clean Dish Indicator options can be changed.
Prefinished and Integrated Models
1. Press the POWER button to turn the
to the Normal
Operating Mode.
2. Press and hold the ECO and LOCK buttons for 5 seconds. When
the buttons have been correctly pressed, one long beep is emitted.
3. Release the LOCK and ECO buttons.
4. Use the appropriate buttons on the control panel to make the
necessary adjustments. These are explained below.
5. Once the changes have been made, press the POWER button to
return to the Normal Operating Mode.
The
will save these changes automatically.
HOW TO ENTER OPTION ADJUSTMENT MODE
Integrated Models
1. Enter the Option Adjustment Mode as explained previously.
2. Press the START/PAUSE button until the light above the
START/PAUSE button is green, if it is not, press the POWER button
and start again. The current water softener setting is shown on the
wash program indicator in red lights. If four red lights are lit, then the
water softener is set to four.
3. Press the LOCK button to increase or decrease the water softener
setting. For example, if the water hardness is 500ppm, there should
be four red lights lit.
4. Once you have selected the desired water softener setting, press
the POWER button to return to the Normal Operating Mode.
Example of the Water Softener set to 4.
Prefinished Models
1. Enter the Option Adjustment Mode as explained previously.
2. Press the START/PAUSE button until the letters ’hd’ appear on the
electronic display. The current water softener setting is shown on the
wash program indicator in red lights. If four red lights are lit then the
water softener setting is at four.
3. Press the LOCK button to increase or decrease the water softener
setting. For example, if the water hardness is 500ppm, the number of
lights that are lit should be four.
4. Once you have selected the desired water softener setting, press
the POWER button to return to the Normal Operating Mode.
Electronic display
Example of the Water Softener set to 4.
How to Adjust the Water Softener Setting
(for models DD603H and DS603H only)