Fisher & Paykel DishDrawer User Manual

Page 7

Advertising
background image

Note

If the

is operating

and a power failure occurs, it

will stop. The

may be unable to be opened

during this time. When the

power supply is resumed, the

will restart in the

same part of the wash program.

Lock Button (optional)

The Lock button

activates/ deactivates the

Keylock or the Childlock functions.

Keylock

The Keylock function disables all the buttons on the

. To activate, press and hold the

LOCK button until you hear one beep (about 3

seconds).

Childlock

The Childlock feature locks the

and

disables all the buttons. To activate, press and hold

the LOCK button until you hear two beeps (about 5

seconds).

To cancel Keylock or Childlock, press and hold the

LOCK button until you hear one beep and the Lock

symbol disappears from the electronic display.

5

Check

Ensure the drain filter is flush

with filter plate and the spray

arm can rotate about the center

easily.

Start

Close the

. Press

the START/PAUSE button

to initiate the wash program.

This button also functions as the

Delay Start.

Pause

To pause the

during its wash cycle, press the

START/PAUSE button and wait for

three beeps before opening.

Restart by pressing the

START/PAUSE button. Forcing the

drawer open while in mid cycle

may cause damage or injury.

Finish

The

will beep six

times to indicate the end of the

wash program. At the end of the

wash program the drying fan will

continue to run for a set time or

until the drawer is opened. The

fan assists with drying and uses

negligible amounts of energy. It

is normal for some water to

remain in the drain filter area

after the wash program is

complete.

To cancel Delay Start, press the POWER button or

hold the START/PAUSE button until the delay

symbol

disappears.

DELAY START MODE (optional)

The start of the wash program can be delayed from 1 to 12 hours.

To activate Delay Start:

1. Press and hold the START/PAUSE button until the delay symbol

appears on the Electronic Display.

2. Continue until the desired delay time has been reached.

3. The

will start once the delay time has elapsed and

the drawer is closed.

6

8

7

Advertising